INSTALLATION
Installation in 10 minutes, no drilling
JetSwim installs by hanging on the edge of a finished pool. No drilling, no construction work, no professional needed — you can do it yourself with ordinary tools.
Step-by-step guide
01
Choose the spot
Choose a straight section of the pool edge with enough room for swimming against the current — ideally the longer side.
02
Hang the unit
Fit the bracket onto the pool edge. The universal design adapts to most edge types without any drilling.
03
Connect the power
Plug the control unit into a standard 230V socket. The motor part in the water runs on a safe 12V voltage.
04
Set the level
Select one of 5 intensity modes on the touch panel, remote control or in the app.
05
Test it and swim
Before the first swim, check that the bracket is secure and try the lowest mode.
Compatibility and requirements
Pool types
Liner, fibreglass and concrete pools. Minimum recommended size 5 × 3 m.
Electrical connection
A standard 230V socket within reach of the control unit cable (5–15 m depending on model).
Tools
Installation usually requires no special tools — just your hands.
Maintenance
—
For winter we recommend removing the unit and storing it in a dry place.
—
The motor part is maintenance-free — no lubrication, no service checks.
—
When used in saltwater (up to 0.4%) no special extra care is needed.
—
The outer cover can be cleaned with a damp cloth.